Introduction of PVC high-speed door

The design of PVC high-speed doors is mainly used in industrial facilities that require rapid operation or insulation. PVC high-speed doors can play the role of isolation. Its operation is fast and suitable for different places.

Here is the content list:

• Advantages of PVC high-speed doors for workshop

• Disadvantages of PVC high-speed doors

• Precautions for the use of PVC high-speed doors

Advantages of PVC high-speed doors for workshop

1. To ensure the effectiveness of the purification equipment inside the workshop, the PVC high- speed door divides the workshop into two areas with different temperatures, providing a good and comfortable working environment.

2. Good air tightness. The weather is cold in winter, and the temperature difference between indoors and outdoors is large. If the air tightness of the door body is not high, the pressure difference between indoor and outdoor air will be formed. The outdoor cold air will seep into the room through the gap, easily leading to a large fluctuation of the room temperature and a large amount of heat energy consumption in the indoor environment. However, the weather is hot in summer. If the air tightness of the PVC high-speed door is not good, it will cause the hot air to

flow into the room through the gap; This leads to an increase in refrigeration consumption.

3. It can save energy and reduce consumption, and prevent the loss of indoor energy. This appears to be an incomplete sentence. Consider rewriting the sentence or connecting the fragment with another sentence.

4. Effectively prevent the invasion of outdoor dust and flying insects. Through the above simple sharing, the airtightness of PVC is a very important measure to save energy and reduce consumption. It is necessary to set up PVC high-speed doors in constant temperature, humidity, and dust-free workshops so that it is easier to maintain the hygiene of the production plant.

Disadvantages of PVC high-speed doors

This material of PVC has one defect. During use, PVC will drop some toxic additives. When burning PVC waste, dioxins will also be produced, which is a highly toxic substance and may cause cancer or other diseases.

Although the PVC fast door has a long service life, its stability is not good after all. It may change color under the sunlight for a long time, and it is also easy to deform in daily life

Precautions for the use of PVC high-speed doors

1. PVC high-speed doors are generally closed.

2. During actual operation and application, operators are not allowed to go to the actual operation site without authorization. Employees are required to pay close attention to the opening and closing conditions and implementation.

3. In the vicinity of the PVC high-speed door, try not to stack articles, especially some volatile gases or liquids with strong corrosivity, or the surface of the door equipment may be damaged.

4. When the door curtain is opened or closed, it is strictly forbidden to walk under the door

If you want to know more information about the PVC high-speed door, welcome to consult us. Our website is :www.everbrightdoor.com. Looking forward to our cooperation.