English 
 |
| Quantity: | |
|---|---|
Available as a single stack to one side or bi-folding to both sides of larger openings they will provide an excellent solution for either effortless manual operation or electric operation on larger sizes. Minimal maintenance is also a positive reason for specifying folding doors with very few actual moving parts, even less of course with a one piece sliding door set.
The industrial folding doors can be installed in especially large openings measuring up to 14 m width and 7 m height.
we can offer 3 to 12 door leaves, in accordance with the operative requirements. This version can be individually adapted to the customer's needs.
Folding and Sliding Door solutions for any application
The FPU double-skinned folding doors filled with PUR rigid foam are ideal for use in workshops and halls that are heated or require acoustic insulation.
The door version with numerous infill variations and extensive glazing options are particularly suited for unheated buildings.
They can also be combined with matching aluminum doors. Featuring profiles with thermal breaks and exceptional thermal insulation values make these doors a good choice for showrooms and the like. Every door can be equipped with individual glazing and infill options. An extensive folding door programme is rounded out with wicket doors with and without thresholds and divided traffic leaves.
Whether the door is sliding or folding the glazing options are endless with single or double glazed units in sizes ranging from a round port hole to fully glazed sections in extruded aluminium.
Low risk of collision damage
Door leaves parked open on the sides substantially reduce the risk of collisions in a working environement. The leaves are in the field of vision of the lorry driver. Fitting the door with door leaves that open 180° and sufficient space next to the door also result in a maximum drive through passage width and height.
Low-maintenance construction
The Samson industrial folding doors have been designed to have a long service life and operate smoothly. This reliable construction is based on just a few individual hard wearing quality components. As a result requirements for maintenance and care are very low and the doors only entail minor consequential costs over time.
Standard and protection
Safety takes top priority when it comes to Everbright's industrial folding doors. Finger trap protection devices made of high-quality EPDM multi-chamber profiles are fitted to all vertical closing edges, making the folding industrial door safe from the inside and outside.
Technical data
Size range | Width of opening / wall up to 8200 mm | CE mark | EN 13241-1 |
Height up to 6000 mm | Wind resistance class | Class 3 | |
Track applications | On the wall, opening inwards or outwards | Acoustic insulation | DIN EN 717-1 R = 28 dB |
In the opening, opening inwards or outwards | Fire behavior (DIN 4102) | Leaf: Material class B (self-extinguishing) | |
Space requirement for folding | Between 150 mm (one leaf) and 350 mm (three leaves) with 90° leaves | Insulation | Foam density 43 – 45 kg/m³ |
Door transmission of heat | According to standard 13241-1U = 1.7 W/ (m²·K) |
Available as a single stack to one side or bi-folding to both sides of larger openings they will provide an excellent solution for either effortless manual operation or electric operation on larger sizes. Minimal maintenance is also a positive reason for specifying folding doors with very few actual moving parts, even less of course with a one piece sliding door set.
The industrial folding doors can be installed in especially large openings measuring up to 14 m width and 7 m height.
we can offer 3 to 12 door leaves, in accordance with the operative requirements. This version can be individually adapted to the customer's needs.
Folding and Sliding Door solutions for any application
The FPU double-skinned folding doors filled with PUR rigid foam are ideal for use in workshops and halls that are heated or require acoustic insulation.
The door version with numerous infill variations and extensive glazing options are particularly suited for unheated buildings.
They can also be combined with matching aluminum doors. Featuring profiles with thermal breaks and exceptional thermal insulation values make these doors a good choice for showrooms and the like. Every door can be equipped with individual glazing and infill options. An extensive folding door programme is rounded out with wicket doors with and without thresholds and divided traffic leaves.
Whether the door is sliding or folding the glazing options are endless with single or double glazed units in sizes ranging from a round port hole to fully glazed sections in extruded aluminium.
Low risk of collision damage
Door leaves parked open on the sides substantially reduce the risk of collisions in a working environement. The leaves are in the field of vision of the lorry driver. Fitting the door with door leaves that open 180° and sufficient space next to the door also result in a maximum drive through passage width and height.
Low-maintenance construction
The Samson industrial folding doors have been designed to have a long service life and operate smoothly. This reliable construction is based on just a few individual hard wearing quality components. As a result requirements for maintenance and care are very low and the doors only entail minor consequential costs over time.
Standard and protection
Safety takes top priority when it comes to Everbright's industrial folding doors. Finger trap protection devices made of high-quality EPDM multi-chamber profiles are fitted to all vertical closing edges, making the folding industrial door safe from the inside and outside.
Technical data
Size range | Width of opening / wall up to 8200 mm | CE mark | EN 13241-1 |
Height up to 6000 mm | Wind resistance class | Class 3 | |
Track applications | On the wall, opening inwards or outwards | Acoustic insulation | DIN EN 717-1 R = 28 dB |
In the opening, opening inwards or outwards | Fire behavior (DIN 4102) | Leaf: Material class B (self-extinguishing) | |
Space requirement for folding | Between 150 mm (one leaf) and 350 mm (three leaves) with 90° leaves | Insulation | Foam density 43 – 45 kg/m³ |
Door transmission of heat | According to standard 13241-1U = 1.7 W/ (m²·K) |